(1) Get internet connection
Connect Wi-Fi
	- Wireless --> Security Profiles --> Add
	- Wireless --> Interface --> Enable -->
		Choose Security Proflie --> Scan --> Connect
	- Wireless interface mode should be "station pseudobridge" if you are connecting to non-MikroTik access point



(2) Create Virtual Routers
	 - MR-1 = Gateway Virutal Router, disable it once created
 	 - MR-2 = Client Virtual Router, disable it once created



(3) Bridge Virtual Routers
	 - Bridge --> Add --> WI-FI (WAN, MR-1 to Physical Wi-Fi)
	 - Bridge --> Add --> LAN (LAN, MR-1 to MR-2)
	 - MetaROUTERs --> Virtual Ethernet --> Add --> VE-MR-1-ether1
	 - MetaROUTERs --> Virtual Ethernet --> Add --> VE-MR-1-ether2
	 - MetaROUTERs --> Virtual Ethernet --> Add --> VE-MR-2-ether1
	 - Assign Virtual Ethernets to MetaROUTERs
		MR-1: VE-MR-1-ether1, VE-MR-1-ether2
		MR-2: VE-MR-2-ether1
	- Add Interfaces to Bridges
		WI-FI: wlan1, VE-MR-1-ether1 (Bridge to Host in VMware)
		LAN: VE-MR-1-ether2, VE-MR-2-ether1
			(LAN Segment in VMware)



(4) Service Provisioning
 - Boot up MetaROUTERs
 - Configure DHCP Client on MR-1
 - Configure NAT on MR-1
 - Configure LAN IP on MR-1
 - Configure DHCP Server on MR-1
 - Configure DHCP Client on MR-2